Advertisement
After the IDE hard disk drive information has been entered into BIOS, new IDE
l
hard disk drive must be partitioned (such as with FDISK.EXE), please refer to a
MS-DOS manual and then formatted before data can be read from and write on
Primary IDE hard disk drive must have its partition set to active (also possible with
FDISK.EXE).
The available options for IDE HDD Auto-Detection are : [Press Enter].
The available options for IDE Primary Master are : [Auto] [Manual] [None].
The available options for Access Mode are : [Auto] [Normal] [LBA] [Large].
6.1.3 Video
This item set the Video mode of the system. This motherboard has a built-in VGA
graphics circuit so you must leave this item at the default value.
[EGA/VGA] : Enhanced Graphics Adapter/Video Graphics Array. For EGA, VGA,
l l l l l
SVGA, or PGA monitor adapters.
[CGA 40] : Color Graphics Adapter, power up in 40 column mode.
l l l l l
[CGA 80] : Color Graphics Adapter, power up in 80 column mode.
l l l l l
[MONO] : Monochrome adapter, includes high resolution monochrome
l l l l l
adapters.
The available options for Video are : [EGA/VGA] [CGA 40] [CGA 80] [MONO].
6.1.4 Halt On
This item set whether the system will stop If an error is detected during POST
(Power On Self Test) routine.
[All, But Keyboard] : The system boot will not stop for a keyboard error; it will
l l l l l
stop for all other errors.
[All, But Diskette] : The system boot will not stop for a disk error; it will stop for
l l l l l
all other errors.
[All, But Disk/Key] : The system boot will not stop for a keyboard or disk error;
l l l l l
it will stop for all other errors.
[All Errors] : Whenever the BIOS detects a non-fatal error the system will be
l l l l l
stopped.
[No Errors] : The system boot will not stop for any error that may be detected and
l l l l l
you will be prompted.
32
M81E / M81DC2 / M812-FX Series User's Manual
Advertisement
