Start Printing - Canon MARK II EOS 5D Instruction Manual

With Easy printing, you can print another image with the same settings.
Just select the image and press the <
printing, the number of copies will always be 1. (You cannot set the
number of copies.) Also, any trimming (p.161) will not be applied.
The [Default] setting for printing effects and other options are the
printer's own default settings as set by the printer's manufacturer. See
the printer's instruction manual to find out what the [Default] settings are.
Depending on the image's file size and image-recording quality, it may
take some time for the printing to start after you select [Print].
If image tilt correction (p.161) has been applied, it will take longer to print
the image.
To stop the printing, press <
[OK].
Set the date and file number
5
imprinting.
Set as necessary.
Select <
I
Set as desired, then press <0>.
Set the number of copies.
6
Set as necessary.
Select <
R
Set the number of copies, then press
<0>.

Start printing.

7
Select [Print], then press <0>.
The <l> button's blue lamp will
blink and the printing will start.
l
0
> while [Stop] is displayed, then select
>, then press <0>.
>, then press <0>.
> button lit in blue. With Easy
wPrinting
159