Custom Function Settings; C.fn I: Exposure; Increments - Canon MARK II EOS 5D Instruction Manual

Custom Function SettingsN
3

C.Fn I: Exposure

C.Fn I -1
0: 1/3-stop
1: 1/2-stop
Sets 1/2-stop increments for the shutter speed, aperture, exposure
compensation, AEB, flash exposure compensation, etc. Effective when
you prefer to control the exposure in less fine increments than 1/3-stop

increments.

The exposure level will be displayed in the viewfinder and on the LCD
panel as shown below.
C.Fn I -2
0: 1/3-stop
1: 1-stop
C.Fn I -3
0: Off
1: On
Enables "L" (equivalent to ISO 50), "H1" (equivalent to ISO 12800), and
"H2" (equivalent to ISO 25600) to be selectable for the ISO speed.
C.Fn I -4
0: On
The AEB and WB-BKT settings will be canceled if you set the power
switch to <2> or clear the camera settings. AEB will also be
canceled when the flash is ready to fire.
1: Off
The AEB and WB-BKT settings will be retained even when the power
switch is set to <2>. (When the flash is ready, AEB will be canceled.
However, the AEB amount will be retained in memory.)
174
Exposure level increments
ISO speed setting increments
ISO expansion
Bracketing auto cancel