Conventions Used In This Manual - Canon MARK II EOS 5D Instruction Manual

Conventions Used in this Manual

Icons in this Manual
<6>
<5>
<9>
<0>
, 8: Indicates that the respective function remains
0, 9,
* In this manual, the icons and markings indicating the camera's buttons, dials,
and settings correspond to the icons and markings on the camera and on the
LCD monitor.
3 : Indicates a function which can be changed by pressing the
<M> button and changing the setting.
M
: When shown on the right of the page, it indicates that the
function is available only when the Mode Dial is set to d, s,
f, a, or F.
* Function which cannot be used in the fully-automatic modes (1/C).
(p.**) : Reference page numbers for more information.
: Tip or advice for better shooting.
: Problem-solving advice.
: Warning to prevent shooting problems.
: Supplemental information.
Basic Assumptions
All operations explained in this manual assume that the power switch
is already set to <1> or <J> (p.27).
<5> operations explained in this manual assume that the power
switch is already set to <J>.
It is assumed that all the menu settings and Custom Functions are
set to the default.
For explanatory purposes, the instructions show the camera attached
with an EF 50mm f/1.4 USM lens (or EF 24-105mm f/4L IS USM).
4
: Indicates the Main Dial.
: Indicates the Quick Control Dial.
: Indicates the Multi-controller.
: Indicates the setting button.
active for 4 sec., 6 sec., 10 sec., or 16 sec.
respectively after you let go of the button.