Download Print this page
Dancing Wings Hobby T90 Tractors Instruction Manual

Dancing Wings Hobby T90 Tractors Instruction Manual

Advertisement

Quick Links

注意事项
SAFETY PRECAUTIONS
这个产品不是玩具,而是一个复杂的具有难度的飞行器。您和您身边人的安全取决于您如何操作它,您需要了解相关知识,并谨慎操作。禁止
没有成人陪伴的儿童独自操作该设备。不适合14岁以下人群使用。再次强调,这不是一个玩具。
This product should not be considered a toy, but rather a complicated and sophisticated flying model. Your safety depends
on how you use and fly it, If not correctly operated, could cause injury to you or your family members. Children must be
accompanied by an adult at all times if operating this product. Not suitable for children under the age of 14. THIS IS NOT A
TOY.
● 不要在机场,军事基地,居民区或其他任何受限制的地方飞行。
● Do not fly around some restricted location like airports, military bases, residential areas, etc.
● 您需要对发射机进行距离检查,以确保没有收到任何干扰。
● You will need to range check the transmitter to be sure you are not experiencing any interference.
● 始终保持先打开发射机后打开接收机,先关闭接收机后关闭发射机的步骤。
● Always turn on the receiver last after turning on the transmitter and shut off the receiver first before turning off the transmitter.
● 如果您是初学者,建议您在有经验玩家的协助下调试和飞行。
● If you are only a beginner to the radio control model flying, do not attempt to fly your model without any assistance or advice from
advanced expert fliers.
● 请将相关物品放置在孩子们够不到的地方
● Keep relevant items out of reach of children.
● 这个设备的设计已经超过我们正常使用所需要刚性要求,但若您需要以超出我们推荐的动力飞行时,请合理控制动作幅度并适当增加机体强度。
● This product has been flight tested to meet or exceed our rigid performance and reliability standards in normal use,if you plan to perform
any high-stress flying, you are solely responsible for taking any and all necessary steps to control movement range and reinforce the body
strength.
● 您的设备中可能包括一些玻纤和碳纤雕刻的部件,这些纤维部件所带的粉尘可能会引起眼睛,皮肤的不适,请您在需要的时候带上护目镜或者防尘服。
● This product may include some fiberglass and carbon-fiber reinforced plastic parts,which may cause eye and skin discomfort,pls wear the
goggles or dust-proof clothes when needed.
● 因航空运输安全管制,您收到的产品可能没有清单中出现过的胶水,请您理解无法发送胶水给您的原因。您可以在当地文具店很方便的购买到您所需要
的胶水。
● Due to air traffic safety control, the products you receive may not have the glue that appears in the list. Please understand and purchase the
glue you need at your local stationery store.
http://www.dwhobby.com/
Balsawood Airplane
飞行参数
推荐配置
Specification
Suggested Equipment
推荐引擎: DLE 20cc/DLE 20ccRA
翼展:2130mm
推荐舵机: 37g*7pcs
机长:1500mm
推荐桨叶: 16-18寸
起飞重量≈5.3Kg
推荐8通道以上接收机
Wingspan: 2130mm
Suggested Motor: DLE 20cc/DLE 20ccRA
Length: 1500mm
Suggested Servos: 37g*7pcs
Flying Weight≈5.3Kg
Suggested Propeller: 16-18 inch
Radio≥8CH
T90
工具
Tools Needed

Advertisement

loading

Summary of Contents for Dancing Wings Hobby T90 Tractors

  • Page 1 Balsawood Airplane 注意事项 SAFETY PRECAUTIONS ● 这个产品不是玩具,而是一个复杂的具有难度的飞行器。您和您身边人的安全取决于您如何操作它,您需要了解相关知识,并谨慎操作。禁止 没有成人陪伴的儿童独自操作该设备。不适合14岁以下人群使用。再次强调,这不是一个玩具。 ● This product should not be considered a toy, but rather a complicated and sophisticated flying model. Your safety depends on how you use and fly it, If not correctly operated, could cause injury to you or your family members. Children must be accompanied by an adult at all times if operating this product.
  • Page 2 01-8 01-9 配件图仅做参考用,您收到的实物可能因为 修改/优化的原因导致与图片有略有不同。 Photos shown here just for reference, the product you received maybe 在卡口内嵌入轻木条 6*8mm 拼装此步骤时,用少量快干胶稍加固 slightly differ from the photos due to Insert the balsa strip into the slot 定,方便后面步骤调整。 continuous improvement on products. 按实际长度截取 When assembling this step, use a Cut according to actual length small amount of quick-drying glue to fix it slightly, which is...
  • Page 3 铝管 20*530MM 细节Detail 4 01-19 01-20 01-21 01-22 Aluminum tube 20*530MM M1-2 M1-3 M1-4 M1-4 M1-3 M1-2 细节Detail 2 细节Detail 3 先插入长玻纤片1,然后再侧 M1蒙板有长短两种,具体见页码4结尾处描述。 边卡入方玻纤片2,卡牢固后 01-24 01-24 M1 masks are available in both long and short 用胶水粘合2在机翼上。 versions. See page 4 for details. Firstly insert the long fiberglass sheet 1, 01-23...
  • Page 4 以下2个步骤建议蒙皮完成后再安装。 尾翼及后尾轮安装到机身 Mount the tail and rear tail wheel to the fuselage 蒙皮详细操作可查看以下链接内容,我们提供了蒙皮范本 The following two steps recommend to install after covering the film. (可直接扫二维码) 以下步骤需蒙皮完成后再安装。The following steps need to install after covering the film. 后续步骤需要蒙皮处均可参考此蒙皮范本。 For detailed operation of the film, please view the following link.We provide the example (can directly Follow-up steps that need to cover the film refers to this template.
  • Page 5 常规飞行(Normal Flying) 3D飞行 部分飞机支持(3D Flying only support some models) 连杆从机身尾部预留槽导出,根据连 04-3 04-4 杆位置确定出舵角位置,然后安装舵 副翼 Aileron ±(15°-30°) ±40° 或者更大(or larger) 角。在舵角上安装快装接头,快装接 平尾 Elevator ±15° ±40° 或者更大(or larger) 头锁定连杆。 垂尾 Rudder ±15° ±40° 或者更大(or larger) The linkage rod is led out from the 常用襟翼...
  • Page 6 重心位置展示 Display for C.G 地面控制方向测试 注意:设置重心时,油箱放置在重心点位 置。 Control Directions Tests Note: When setting the center of ≈110mm gravity, the oil tank is placed at the center of gravity. 遥控器动作 飞机反应 升 升降杆下拉 降 Lifting rod down 舵 升降杆上推 折叠PVC风挡到合适形状,然后粘到驾驶室前部。 Lifting rod up Fold the PVC windshield to the suitable shape and stick it to the cab.