Sony XEL-1 Operating Instructions Manual page 38

Subtitle Set-up
Audio Set-up
Radio Display
38
GB
Programme Removes any unwanted digital channels stored on the TV,
Sorting
and changes the order of the digital channels stored on the
TV.
1
2
3
Digital Manual Tunes the digital channels manually. This feature is available
Tuning
when "Digital Auto Tuning" is set to "Antenna".
1
2
3
Repeat the above procedure to manually tune other channels.
Subtitle Setting When "For Hard Of Hearing" is selected, some visual aids
may also be displayed with the subtitles (if TV channels
broadcast such information).
Subtitle
Allows you to select the language of the subtitles.
Language
Audio Type Switches to broadcast for the hearing impaired when "For
Hard Of Hearing" is selected.
Audio Language Selects the language used for a programme. Some digital
channels may broadcast several audio languages for a
programme.
Audio Provides audio description (narration) of visual information if
Description
TV channels broadcast such information.
Mixing Level*
Adjusts the TV main audio and Audio Description output
levels.
Dynamic Range Compensates for differences in the audio level between
different channels. Note that this function may have no effect
for some channels.
Optical Out
Selects the audio signal that is output from the
HEADPHONE OUT/DIGITAL AUDIO OUT (OPTICAL)
terminal on the side of the TV.
z
* This option is only available when "Audio Description" is set to "On".
Displays the screen wallpaper when you listen to a radio broadcast.
You can select the screen wallpaper colour or display a random colour.
To cancel the screen wallpaper display temporarily, press any button.
Press V/v to select the channel you want to remove or
move to a new position.
You can also select a channel by pressing the number
buttons to enter its three-digit channel number.
Remove or change the order of the digital channels as
follows:
To remove the digital channel
Press . After a confirmation message appears, press B
to select "Yes", then press
To change the order of the digital channels
Press b, then press V/v to select the new position for the
channel and press B.
Press RETURN.
Press the number button to select the channel number
you want to manually tune, then press V/v to tune the
channel.
When the available channels are found, press V/v to
select the channel you want to store, then press
Press V/v to select the programme number where you
want to store the new channel, then press
.
.
.