Sony XEL-1 Operating Instructions Manual page 35

Screen Settings
Speaker
HDMI Set-up
Product Information
Screen Format See "To change the screen format manually" on page 22.
Auto Format Automatically changes the screen format according to the
input signal. To keep your setting, select "Off".
Display Area Adjusts the picture display area in 1080i/p and 720p sources
when "Screen Format" is set to "Wide".
Normal
+1
Horizontal Shift Adjusts the horizontal position of the picture.
Vertical Shift Adjusts the vertical position of the picture when "Screen
Format" is set to "Smart", "Zoom" or "14:9".
Vertical Size Adjusts the vertical size of the picture when "Screen Format"
is set to "Smart", "Zoom" or "14:9".
Turns on/off the TV's internal speakers.
TV Speaker The TV speakers are turned on in order to listen to the TV's
sound through the TV speakers.
Audio System The TV speakers are turned off in order to listen to the TV's
sound only through your external audio equipment. When
connected with "Control for HDMI" compatible equipment,
you can turn the connected equipment on interlocked with the
TV. This setting must be made after connecting the
equipment.
This is used to set the "Control for HDMI" compatible equipment connected to the
HDMI sockets. Note that the interlock setting must also be made on the connected
"Control for HDMI" compatible equipment side.
Control for HDMI This sets whether to interlock the "Control for HDMI"
compatible equipment and the TV. When set to "On", the
following menu items can be performed. However, power
consumption in standby mode is higher than usual. If the
specific Sony equipment that is compatible with "Control for
HDMI" is connected, this setting is applied to the connected
equipment automatically when the "Control for HDMI" is set
to "On" using the TV.
Auto Devices Off When this is set to "On", the "Control for HDMI" compatible
equipment turns off when you switch the TV to standby mode
using the remote.
Auto TV On When this is set to "On" and if the connected "Control for
HDMI" compatible equipment is turned on, the TV
automatically turns on, and the displays the HDMI input from
the connected equipment.
Device List Creates or updates the "HDMI Device List". Up to 14
Update "Control for HDMI" compatible equipment can be
connected, and up to 4 equipment can be connected to a
single socket. Be sure to update the "HDMI Device List"
when you change the "Control for HDMI" compatible
equipment connections or settings. Select them manually one
by one until getting a correct picture for several seconds.
HDMI Device List Displays the connected "Control for HDMI" compatible
equipment.
~
• You cannot use "Control for HDMI" if the TV operations
are linked to the operations of an audio system that is
compatible with "Control for HDMI".
Displays your TV's product information.
Displays pictures in their recommended
size.
Displays pictures in their original size.
(Continued)
35
GB