Sony XEL-1 Operating Instructions Manual page 36

All Reset
Analogue Set-up
Programme List
Display
Auto Tuning
Programme Sorting
Manual Programme
Preset
36
GB
Resets all settings to the factory settings and then displays the "Auto Start-up"
screen.
z
• Be sure not to turn the TV off during this period (it takes about 30 seconds) or
press any buttons.
• All settings, including digital favourite list, country, language, auto tuned
channels, etc. will be reset.
Select "Off" to hide the list of analogue channels from the XMB™
(XrossMediaBar).
Tunes in all the available analogue channels.
This option allows you to retune the TV after moving house, or to search for new
channels that have been launched by broadcasters.
Changes the order in which the analogue channels are stored on the TV.
1
Press V/v to select the channel you want to move to a new position, then press
.
2
Press V/v to select the new position for your channel, then press
Before selecting "Label"/"AFT"/"Audio Filter"/"LNA"/"Skip", press PROG +/–
to select the programme number with the channel. You cannot select a programme
number that is set to "Skip" (page 37).
System/Channel Presets programme channels manually.
1
2
3
4
5
6
7
Press V/v to select the programme number you want to
manually tune, then press
Press V/v to select "System", then press
Press V/v to select one of the following TV broadcast
systems, then press .
B/G: For western European countries/regions
I: For the United Kingdom
D/K: For eastern European countries/regions
L: For France
Press V/v to select "Channel", then press
Press V/v to select "S" (for cable channels) or "C" (for
terrestrial channels), then press b.
~
• "S" is not available when "United Kingdom" is
selected for "Country" (page 12).
Tune the channels as follows:
If you do not know the channel number
(frequency)
Press V/v to search for the next available channel. When
a channel has been found, the search will stop. To
continue searching, press V/v.
If you know the channel number (frequency)
Press the number buttons to enter the channel number of
the broadcast you want.
Press to jump to "Confirm", then press
Your changes have been saved. Repeat the above
procedure to preset other channels manually.
.
.
.
.
.