Sony XEL-1 Operating Instructions Manual page 37

Digital Set-up
Digital Tuning
Label Assigns a name of your choice, up to five letters or numbers,
to the selected channel. This name will be displayed briefly
on the screen when the channel is selected.
Creates your own label.
1
2
3
AFT Allows you to fine-tune the selected programme number
manually if you feel that a slight tuning adjustment will
improve the picture quality.
You can adjust the fine tuning over a range of –15 to +15.
When "On" is selected, the fine tuning is performed
automatically.
Audio Filter Improves the sound for individual channels in the case of
distortion in mono broadcasts. Sometimes a non-standard
broadcast signal can cause sound distortion or intermittent
sound muting when watching mono programmes.
If you do not experience any sound distortion, we
recommend that you leave this option set to the factory
setting "Off".
~
• You cannot receive stereo or dual sound when "Low" or
"High" is selected.
LNA Improves the picture quality for individual channels in the
case of very weak broadcast signals (noisy picture).
If you cannot see any improvement in the picture quality even
if you set to "On", set this option to "Off" (factory setting).
Skip Skips unused analogue channels when you press PROG +/–
to select channels. (You can still select a skipped channel
using the number buttons.)
Confirm Saves changes made to the "Manual Programme Preset"
settings.
Digital Auto Tunes in the available digital channels.
Tuning
This option allows you to retune the TV after moving house,
or to search for new channels that have been launched by
broadcasters. For details, see step 6 of "3: Performing the
initial set-up" (page 12).
Press V/v to select the desired letter or number ("_" for
a blank space), then press b.
If you input a wrong character
Press B/b to select the wrong character. Then, press V/v
to select the correct character.
Repeat the procedure in step 1 until the name is
completed.
Select "OK", then press .
37
(Continued)
GB