Sony XEL-1 Operating Instructions Manual page 34

x.v.Colour
Photo Colour Space
Auto Brightness
Control
Timer Settings
Set-up
Auto Start-up
Language
34
GB
Displays moving pictures that is more faithful to the original source by matching
the colour space of source.
~
• The setting is fixed to "Normal" when the input signal is HDMI (RGB), even if
"x.v.Colour" is selected.
• Only available for HDMI 1/2 in format 720p, 1080i or 1080p.
Selects the option ("sRGB", "sYCC", "Adobe RGB") to match the output colour
space within the output signal from the equipment connected to the HDMI or USB.
~
• Select "sYCC" when using the equipment that supports "x.v.Colour".
• Only available for HDMI 1/2 in format 1080i or 1080p.
• Not available when "Colour Space" is set to "Wide" (page 32).
Adjusts the brightness of the image automatically when highly contrasting images
are displayed on the screen for a long period of time. The brightest elements on the
screen, such as the time indicator or the broadcast logo, will be less bright in order
to protect the screen from damage. Ghosting may occur in rare cases. Select one of
the options, "High", "Medium" or "Low", depending on the dimming level or the
ghosting level of the image. "Medium" is for standard use.
Sets the timer to turn on/off the TV.
Sleep Timer
Sets a period of time after which the TV automatically
switches itself into standby mode.
When the "Sleep Timer" is activated, the
on the TV lights up in orange.
z
• If you switch off the TV and switch it on again, "Sleep
Timer" is reset to "Off".
• A notification message appears on the screen one minute
before the TV switches to standby mode.
On Timer On Timer
Settings
Timer Mode
Time
Duration
Clock Set Allows you to adjust the clock manually. When the TV is
receiving digital channels, the clock cannot be adjusted
manually since it is set to the time code of the broadcasted
signal.
Starts the initial set-up to select the language, country and location, and tune in all
available digital and analogue channels. Usually, you do not need to do this
operation because the language and country will have been selected and channels
already tuned when the TV was first installed (page 12). However, this option
allows you to repeat the process (e.g., to retune the TV after moving house, or to
search for new channels that have been launched by broadcasters).
Selects the language in which the menus are displayed.
Sets the timer to turn on the TV from
standby mode.
Sets the desired day(s) of the week you
want the timer to turn on the TV.
Sets the time to turn on the TV.
Sets how long you want the TV to stay on
before switching to standby mode again.
(Timer) indicator