Mode Setting for Feed Signal
Details are as follows.
Setting value (mode)
Disable
Enable
Mode Setting for Start Print Signal
The settings are as follows.
Setting value (mode)
Disable
Pulse mode
Level mode
Mode Setting for Re-print Signal
Details are as follows.
Setting value (mode)
Disable
Enable
Ignore the feed signal.
Set the feed signal to the following mode: Feed paper when a low level signal is input for
20 msec or longer.
Set the start print signal to the following mode: Ignore it even if the start print signal is
input.
(Normal print mode in which the printer receives and prints data, without using the start
print signal input to the external I/O.)
Set the start print signal to the following mode:
Print labels when a Low signal is input for 20 msec or longer.
Set the start print signal to the following mode:
Print labels as long as a Low signal is input.
Ignore the re-print signal.
Set the re-print signal to the following mode:
Reprint the previously printed label when a Low signal is input for 20 msec or longer.
Chapter 6 Extended I/F Signal Operation Mode Settings
Description
Description
Description
6
59