Table of Contents
Advertisement
10
www.aeg.com
4.3 Heat up indicator
If you activate an oven function, the bars
come on in the display. The bars
show that the temperature in the
appliance increases or decreases.
5. BEFORE FIRST USE
WARNING!
Refer to Safety chapters.
5.1 Initial Cleaning
Remove all accessories and removable
shelf supports from the appliance.
Refer to "Care and
cleaning" chapter.
Clean the appliance before first use.
Put the accessories and the removable
shelf supports back to their initial
position.
5.2 Setting the time
After the first connection to the mains, all
symbols in the display are on for some
seconds. For the subsequent few
seconds the display shows the software
version.
6. DAILY USE
WARNING!
Refer to Safety chapters.
6.1 Operating the appliance
To operate the appliance you can use:
6.2 Oven functions
Oven function
Application
True Fan Cook-
To bake on up to 3 shelf positions at the same time and
ing
to dry food. Set the temperature 20 - 40 °C lower than
for Conventional Cooking.
Pizza Setting
To bake food on 1 shelf position for a more intensive
browning and a crispy bottom. Set the temperature 20
- 40 °C lower than for Conventional Cooking.
When the appliance is at the set
temperature, the bars go off the display.
After the software version goes off, the
display shows h and 12:00.
1. Touch
or
2. Touch
or
3. Touch
or
4. Touch
or
The Temperature / Time display shows
the new time.
5.3 Changing the time
You can change the time of day only
when the appliance is off.
Touch
.
flashes in the display.
To set the new time of day, refer to
"Setting the time".
• the manual mode
• automatic programmes
to set the hours.
.
to set the minutes.
.
Advertisement
Table of Contents
