Clock Functions - AEG BP7004021 User Manual

12 www.aeg.com
6.4 Changing the temperature
Touch or
temperature in steps of 5 °C.
When the appliance is at the set
temperature, an acoustic signal sounds
three times and the Heat up indicator
goes out.
6.5 Checking the temperature
You can see the temperature in the
appliance when the function or
programme operates.
1. Touch
The Temperature / Time display shows
the temperature in the appliance.
2. Touch
temperature or the display shows it
automatically after five seconds.
6.6 Fast heat up function
Do not put food in the oven
when the Fast heat up
function operates.

7. CLOCK FUNCTIONS

7.1 Clock functions table
Clock function
to change the
.
to go back to the set
COUNT UP TIMER
TIME OF DAY
DURATION
END
SET+GO
The Fast heat up function is not available
with every oven function. An acoustic
signal sounds if the Fast heat up function
is not available for the set function if
Faulty tone is activated in the "Settings
menu".
The Fast heat up function decreases the
heat up time.
To activate the Fast heat up function
touch and hold
seconds.
If you activate the Fast heat up function,
the bars on the display
one and
the function operates.
Application
To set the count up, which shows how long the appli-
ance operates. This function has no effect on the opera-
tion of the appliance.
To show the time of day. To change the time of day, re-
fer to "Setting the time".
To set how long the appliance operates.
To set when the appliance deactivates. You can use Du-
ration and End at the same time (Time delay) if you want
the appliance to activate and deactivate automatically
later.
To start the appliance with necessary settings with only
one touch of the sensor field any time later.
for more than three
flash one by
comes on to show that