Table of Contents
Advertisement
4.3 ON/OFF
1. Getting started
The LCD is displayed below for reference:
2. Shut down
Press and hold
off automatically.
4.4 Keypad Operation
Keypad operations include the keypad on the control panel as well as the switches on the
base.
The keypad on the control panel is shown below. When a keypad turns gray in the illustration
on the screen, that particular function is invalid.
www.lazodecontrol.com
POWER for more than 2 seconds in any mode, and the instrument will turn
MOVE: Change an option on the current mode.
ADJ: Change the current value.
1 Press POWER for a while.
2 Then you enter into the main interface as shown in the left
figure.
MOVE/ADJ/SAVE
SET/MENU/OK
ESC/START/STOP/BACK/EXIT
MOVE/ADJ
7
+51 960 810 089
ventas@lazodecontrol.com
Advertisement
Table of Contents
