Installation - Whynter ARC-147WFH Instruction Manual

Installation

1. Slide each hose assembly with the hose connector to unit into the exhaust and intake ports of the rear panel firmly in place.
2. Insert window panels B and C to each end of the main panel A with the exhaust and intake port cut outs. Adjust the
length of the window panel kit by using the screws and nuts mounted on the two ends of the main panel A.
3. Open the window and place the window panel kit into the window. Adjust the extension panels B and C to fit width or
height of window using the screw and nut sets mounted on the main panel A.
C
A
B
Page

13