Käpphållare / Cane holder
Nexus
Art. no: 80703
Montering / Assembling
1
Koppen/
cup
2
MONTERINGSANVISNING / ASSEMBLY INSTRUCTIONS
Öppna klamman så pass mycket
att den kan föras över röret.
Open the clamp about that
much it can be lead over the
tube.
Fästet/
attachment
Innan klamman stängs, ta fästet/
koppen och för in klammans
griptänder genom hålet i fästet/
koppen. Passa på att vrida den i
önskad läge.
Before closing the clamp, take
the attachment/cup and lead
the pliers of the clamp through
the hole of the attachment/cup.
Attend on turning it in prefer-
red position.
3
Fästet/
attachment
Koppen/
cup
Stäng klamman och skruva åt
skruven. OBS! Kontrollera att
fästet/koppen sitter fast.
Close the clamp and tighten the
screw. Note! Make sure that
the attachment/cup is secured.
1
Need help?
Do you have a question about the Nexus 80703 and is the answer not in the manual?
Questions and answers