OPERATING MANUAL
ASSEMBLY/USAGE BATH SAFETY RAILS
FOR MODELS: 1250 Regular / 1255 Inverse
WARNINGS
Never overtighten the bath safety rail as
this could cause damage to the bathtub
or the rail itself.
CARE AND USE
DO NOT use chlorine bleach or abrasive
cleansers. Use soap and water or a mild
detergent. Rinse well before using it
again.
ASSEMBLY
Locate the flattest section of the
Before installing your bath
inner and outer bathtub wall.
safety rail, make sure your
AVOID curves in the bathtub
bathtub is dry and dirt free. The
where bath safety rail cannot
bath safety rail can be mounted
properly grip.
at either end of the tub.
HUMAN CARE CANADA INC.
10-155 Colonnade Road
Ottawa, ON K2E 7K1
MADE IN CANADA
Human Care Canada Inc. All rights reserved. This manual may not be reproduced in
part or in whole without the written permission of the publisher. (REV: JULY 2013)
Never install your bath safety rail on a
plastic or fiberglass tub. The tub rail will
not fit on curved bathtubs.
Periodically check the bath safety rail
to ensure the rubber pads are securely
affixed to the bath safety rail.
Loosen adjustment knob until
bath safety rail is wide enough to
fit tub. Place bath safety rail on
tub with adjustment knob facing
outwards. Turn adjustment knob
clockwise to tighten.
Re-tighten your bath safety rail once a
week to maintain proper installation.
Verify the bath safety rail is firmly in
place before each use (should stay in
place when pressure applied or when
pulled).
Test mounting by pulling bath
safety rail forward, back and side
to side. If bath safety rail moves,
loosen knob, check that the
knob is not threaded or the pads
loose. If okay, replace at desired
position and retighten.
250lb / 113.4kg
DO NOT exceed weight capacity!
DO NOT USE THE BATH SAFETY
RAIL IF THERE ARE ANY CRACKS
OR DAMAGED COMPONENTS!
READ ALL WARNINGS
CAREFULLY
KEEP THIS INFORMATION FOR
FUTURE REFERENCE
CAUTION:
Verify the bath safety rail is firmly
in place before use. If bath safety
rail is not securely in place, it
may come loose causing injury.
IF YOU HAVE ANY PROBLEMS OR REQUIRE
ASSISTANCE WITH THE PRODUCT PLEASE
CALL:
613-723-6734
Need help?
Do you have a question about the 1250 and is the answer not in the manual?
Questions and answers