Error Messages; Parameter 3, Status / Plc Reaction R5Con - Bosch CL400 Manual

7.3

Error Messages

7.3.1

Parameter 3, Status / PLC Reaction R5CON

High Byte
Code
[hex]
00 Job is finished (completed) without error
01 Job on the RSS is being processed
02 Job in queue of RSS
03 Job is finished with error
04 No job with this job number is being processed
1070 072 196-101 (00.06) GB
General Information Regarding BUEP-E and BUEP19E
The BUEP-E protocol creates error information that is divided into three
areas:
D PLC reaction (byte)
D Error class (byte)
D Error code (byte)
The error information is filed in the feedback parameter of the R5CON in the
following order:
Job Status
Low Byte
Code PLC Reaction
[hex]
00 Operation without error
01 Repeat call of FM R5CON
02 Change PLC program
03 Check and change job parameter
04 Process FM R5INIT again
05 Process FM R5REQ again
06 Process FM R5CON again
50 Undefined error code, reaction not possible
7- -13