Endress+Hauser Thermophant T TTR31 Operating Manual page 8

Installation
3.3.2 TTR35 design, dimensions of the process connections
Fig. 4: All dimensions in mm (inch).
L = insertion length L
Item no. Process connection versions
Insertion length L = 20, 50, 100 or 200 mm (0.8, 1.97, 3.94 or 7.87 in)
MB Conical metal-metal for hygienic processes, G½" thread, thread length L1 = 14 mm (0.55").
Suitable welding boss available as accessory.
DB Clamp 1"...1½" (ISO 2852) or DN 25...DN 40 (DIN 32676)
DL Clamp 2" (ISO 2852) or DN 50 (DIN 32676)
DP Clamp 2½" (ISO 2852)
LB Varivent F DN25-32, PN 40
LL Varivent N DN40-162, PN 40
HL APV-Inline, DN50, PN40, 316L, B = bores 6 x Ø8.6 (0.34") + 2 x thread M8
PL DIN 11851, DN50, PN40 (including coupling nut)
PG DIN 11851, DN25, PN40 (including coupling nut)
PH DIN 11851, DN40, PN40 (including coupling nut)
8
TTR31, TTR35
a0011647
Endress+Hauser