Endress+Hauser Thermophant T TTR31 Operating Manual page 13

TTR31, TTR35 Operation
5.1.1 Navigating in the operating menu
T09-TTR31xxx-19-xx-xx-xx-002
Fig. 10: Navigating in the operating menu
A Function group selection
B Function selection
m Enter the operating menu
– Press the E key for longer than 3 s
n Select the "Function group" with the + or − key
o Select the "Function" with the E key
p Enter or change parameters with the + or − key
– Then return to "Function" with the E key
Note: If software locking is enabled, it must be disabled before making entries or changes
q Press the E key several times to return to the "Function group"
– until the appropriate function group is reached again
r Jump back to the measuring position (Home position)
– Press the E key for longer than 3 s
s Query to save data (select "YES" or "NO" with the + or − key)
– Confirm with the E key
!
Note!
Changes to the parameter settings only become effective if you choose s 'YES' when asked to
save data.
Endress+Hauser 13