Step 1
You will need
4 x Dowels
4 x Felt Pads
(H1)
(H6)
Peel o the backing to expose the adhesive side and then apply 1 x Felt Pad (H6) to
the bottom of each Leg (P2x4).
Insert 1 x Dowel (H1) into the top of each Leg (P2x4).
Step 2
You will need
8 x Flat
8 x Bolts
Washers (H4)
(H2)
8 x Spring
1 x Allen Key
Washers (H3)
(H5)
Secure Leg (P2) to Table Top (P1)
as shown with 2 x Flat Washers (H4),
2 x Spring Washers (H3) and 2 x Bolts (H2)
by tightening with the Allen Key (H5).
Repeat steps for the remaining Legs (P2x3).
Once all legs are secured, carefully turn the desk over into the upright position.
fantasticfurniture.com.au
(P2)
(P2)
(P1)
(P2)
(P2)
(P1)
H1
4
X
(P2)
H4
(P1)
H3
H2
H5
(P2)
(P2)
Page 5