Installation; Before Use; Connection - TensCare Sonic Stim + Manual

8) POWER LED: indicates power state
9) ON/OFF switch: Power on by shifting up or power off by shifting down
10) Adapter connection point
11) Lead wire and electrode pad connection point
12) Ultrasound Head / Applicator
13) Main body

5.0 Installation

5.1 Before Use

Remove the device and all accessories from the box. Inspect the device for
damages or missing parts and/or accessories. Report any damage or missing
parts or accessories to your local dealer or retailer from which you purchased
this device.
Kit Contents
1 x Sonic Stim +
1 x Instruction manual
1 x Electrode (50x100mm)
1 x Lead wire
1 x Power adapter
1 x Ultrasound transmission gel (85g)
1 x Quick start guide

5.2 Connection

Prior to connecting this device to the power supply, verify that the voltage
and frequency stated on the rating label match the available power supply.
The power adapter is a part of the supply circuit on which the device's safety
depends on. The approvals for the Sonic Stim + are only valid if used in
combination with the type of adapter provided with the device.
Caution: It is not permitted to connect Sonic Stim + to any other type
of adapter other than adapter provided.
Caution: Connection of accessories other than the ones specified
by the manufacturer can adversely affect the safety of the patient
and the proper function of the equipment; therefore, it is not
permitted.
11