Subscribe to Our Youtube Channel
Related Manuals for Elmo HV-8500SX
Summary of Contents for Elmo HV-8500SX
- Page 1 VISUAL PRESENTER HV-8500SX cev.fr INSTRUCTION MANUAL VISUAL PRESENTER Please read this instruction manual carefully before using this Visual Presenter and keep it for future reference.
-
Page 2: Table Of Contents
CONTENTS 1. PART NAMES AND FUNCTIONS ............ 8 Appearance ....................8 Front Panel ....................8 Operation Panel ..................9 Rear Panel ....................10 Wireless Remote Contro ................12 2. WIRELESS REMOTE CONTROL ........... 13 Preparation ....................13 3. MOUSE ................... 14 4. - Page 3 8. OSD (On-Screen Display) ............. 33 Main menu ....................33 When the white balance is set ..............34 When the gamma is set ................34 When the microphone volume is set ............34 When the IP address is displayed ............... 34 9.
-
Page 4: Part Names And Functions
1. PART NAMES AND FUNCTIONS Appearance 3. Camera Head 12. Infrared Sensor 6. Lighting Unit Arm 5. Lighting Unit 4. Column Lock 2. Column 6. Lighting Unit Arm Rerease Button Press this button 5. Lighting Unit to raise/fold the column. 9. -
Page 5: Operation Panel
Operation Panel 20. Monitor Output Buttons 25. Freeze Button 30. Focus Buttons 24. Image Rotation Button 26. Image Transfer Button 28. Contrast Button 27. White Balance 21. Magnification Button Button 19. Input Selection Buttons 22. Color/B&W Selection Button 29. Iris Buttons 23. -
Page 6: Rear Panel
Rear Panel 31. Power Cord 33. 12VDC Out Terminal 35. RS-232C Terminal 40. Audio-out Terminal 43. Audio-in Terminal 1 Receptacle [ DC12V ] [ RS-232C ] 41. Video-in Terminal 1 [ AC IN ] AUDIO ( L/R ) 1 AC IN POWER VIDEO L AUDIO R... - Page 7 Reference Name Function Page Video-in P.22, P23 Video signal from this terminal is output through the analogue Terminal 1 RGB-out terminal when the input selection is set at RGB1. Video-in P.22, P23 Video signal from this terminal is output through the analogue Terminal 2 RGB-out terminal when the input selection is set at RGB2.
-
Page 8: Wireless Remote Contro
Wireless Remote Control IRIS OPEN LAMP 46. [ IRIS OPEN ] 54. [ LAMP ] IRIS CLOSE MOVE 47. [ IRIS CLOSE ] 55. [ MOVE ] IRIS NORMAL PRESET 48. [ IRIS NORMAL ] 56. [ PRESET ] FOCUS NEAR FOCUS FAR 49. -
Page 9: Wireless Remote Control
2. WIRELESS REMOTE CONTROL Point the infrared emitting part of the wireless remote control unit at the infrared sensor of the Visual Presenter, located on the top of the column, and press the button for the desired function. The receivable range may be narrowed when the Presenter is placed under sunlight, near an inverter fluorescent lamp or in any other unfavorable surroundings. -
Page 10: Mouse
3. MOUSE Connect the mouse to the mouse terminal on the rear Mouse panel. Right button The mouse can control the display and operation of Left button the OSD Menu screen, mouse pointer and the Electronic enlargement. When the left button of the mouse is clicked, the OSD menu and the pointer are displayed. -
Page 11: Setting Up
4. SETTING UP (1) Unfold the lighting unit arms fully until they come to the deadend. Unfold arm 1 and then arm 2 as illustrated. (2) Press the column lock release button, and raise the column until the column lock release button returns to the original position. -
Page 12: Connection To The Monitor And The Projector
Connection to the monitor and the projector The following settings of the Presenter can be switched with the DIP switch. Switch the settings according to the connection environment. The factory settings are as shown in the following table: Initial setting Function Key selection Content... -
Page 13: Connection To The S Video-In Terminal
Connection to the S video-in terminal Connect the S video-out terminal (mini DIN 4P) of the Presenter to the S video-in terminal of the TV/video monitor. For the S video mode, use an S video connection cable available on the market. If the equipment to be used is provided with a Y/C separate connector, a conversion adapter is necessary. -
Page 14: Storing The Presenter
5. STORING THE PRESENTER (1) Turn OFF the power switch, and unplug the power cord and the video cable. (2) Turn the main camera head as illustrated until it is stopped. Note: Be sure to set the camera head in the illustrated position before storing. -
Page 15: Operation Procedures
6. OPERATION PROCEDURES Simple steps for presenting printed material (1) Turn ON the power switch. Note: Before turning ON the power switch, connection to the monitor should have been completed. Note: When the power switch is turned ON, the lighting unit lights up. -
Page 16: Simple Steps For Showing Transparent Material, Such As Overhead Transparencies Or Slide Film
Simple steps for showing transparent material, such as overhead transparencies or slide film Front panel (1) Press the base button [BASE] on the front panel or the lamp button [LAMP] on the wireless remote control to light up the base light (transparent lighting unit) built in the stage. -
Page 17: Various Functions
7. VARIOUS FUNCTIONS Lighting The upper lighting unit for presenting Front panel material such as printed matter and 3-D objects, and the baselight for presenting transparent material, such as slide, and negative films, are built in to the Presenter. Wireless remote control When the lamp button [LAMP] ( [UPPER] / [BASE] ) on the front IRIS OPEN... -
Page 18: Zoom
WIDE Input selection The respective images from two different Operation panel sources such as a PC and an Elmo Presenter "HV-100XG" can be alternately presented on a TV by selecting the source by pressing the desired input selection buttons without changing the cable connections. -
Page 19: Table Of Video- And Audio-In/Out Terminal Selections
Table of Video- and Audio-in / out Terminal Selections Output signal Video-out Terminal Audio-out Terminal Input Main camera video signal Main Unit Microphone Monaural Main camera video signal External video signal 1 RGB1 RGB1 Stereo 1 (L/R) External audio signal 1 Microphone Monaural Main camera video signal... -
Page 20: Table Of Corresponding Signals
Table of Corresponding Signals Polarity of Frequency Resolution Signal the synchronized signal (Number of lines) Horizontal Vertical Pixel clock ( P: Positive, N: Negative ) Horizontal Vertical Mode name VGA1 37.861 85.080 31.500 P / N VGA2 37.861 85.080 31.500 N / P 37.972 85.039... -
Page 21: Electronic Enlargement
Electronic enlargement To double the image. Operation panel To double the central part of the image, press the button [MAGNIFICATION] on the operation panel. When double magnification is selected, the indicator lamp lights up. The image can be enlarged only within the shooting area of the main camera. -
Page 22: Posi/Nega Conversion
Posi / Nega conversion Operation panel To show a negative film. Press the posi/nega conversion button [POSI / NEGA] on the operation panel or wireless remote control, the indicator lamp lights up and the image will be converted accordingly. When the posi/nega conversion button [POSI / NEGA] is pressed again, the indicator lamp goes out and the normal mode is resumed. -
Page 23: Contrast
Contrast To present the material with a little half Operation panel tone such as documents. Images with sharp characters and lines contrasty with background can be obtained. When the contrast button [CONTRAST] on the operation panel is pressed, the indicator lamp lights up, and the image becomes contrasty. -
Page 24: Iris
Iris To adjust the Auto iris level of the lens. Operation panel Press the iris button [OPEN] on the operation panel or the iris open button [IRIS OPEN] on the wireless remote control, and the iris will open. Press the iris button [CLOSE] on the operation panel or the iris close button Wireless remote control [IRIS CLOSE] on the wireless remote... -
Page 25: Focus
Focus Auto Focus Front panel Press the auto focus button [AUTO FOCUS] on the front panel or the auto focus button [AF] on the wireless remote control, and the auto-focus will be Wireless remote control activated. While the auto-focus is in operation, the INPUT indicator lamp on the front panel blinks until the object is brought into focus. -
Page 26: Powered Manual Focus
Powered Manual Focus To focus on specific part of the material, Operation panel such as 3-D material. Press the focus button [NEAR] or [FAR] on the operation panel or the focus button [FOCUS NEAR] or [FOCUS FAR] on the wireless remote control. Wireless remote control Note: The auto focus functions up to FOCUS NEAR... -
Page 27: Lcd Monitor Bracket Socket
LCD monitor bracket socket The LCD monitor bracket socket is used for attaching an LCD monitor (optional) with an LCD monitor bracket (optional). LCD Monitor (optional) LCD Monitor bracket (optional) LCD Monitor bracket socket Connecting to the LCD monitor out terminal The LCD monitor (LM-5011N) can be connected by using the LCD monitor out terminal of the... -
Page 28: Pc Link Software "Image Mate
PC link software “Image Mate” When the “Image Mate” is installed in the PC, the following operations are available: • Image data transfer to the PC • Operation of the Presenter by the PC For details, refer to the installation manual of “Image Mate” and “manual.pdf” in the CD-ROM. -
Page 29: Osd (On-Screen Display)
8. OSD (On-Screen Display) Main menu Icon Name Function Upper light To turn ON/OFF the upper light. ON/OFF When the Presenter is turned ON, the upper light remains at the previously saved settings. Base light To turn ON/OFF the base light. ON/OFF When the Presenter is turned ON, the base light remains at the previously saved settings. -
Page 30: When The White Balance Is Set
Icon Name Function Pointer To change the color and shape of the pointer on the screen. Every time the left button of the mouse is clicked, the icon pointer is switched in order of “White arrow Blue arrow Yellow arrow Red arrow”... - Page 31 Icon Name Function White balance To display the White Balance Adjustment menu. When the left button of the mouse is clicked again, the White Balance Adjustment menu is closed. Auto To set the white balance in the AUTO FOLLOW mode (initial setting). One-push To set the push-set white balance.
-
Page 32: Network Functions
• Connecting the Presenter from the host on the network through telnet. Here, the setup procedure using the Web browser is described. For the setup procedure using telnet, consult your dealer or an authorized ELMO service center Preparation before setting up Before starting the setup, specify the IP address and subnet mask to be set up in the Presenter. -
Page 33: Connection To The Network
Connection to the network • Connection using HUB Connect the Ethernet terminal (RJ-45) of the Presenter to the HUB port with an Ethernet straight cable (UTP Category 5). For the HUB port, use a port other than the cascade port. VIDEO L AUDIO R RGB1... - Page 34 • Then, the Configurations page is displayed. Confirm the settings, and click the link [Network Configuration].To display the Network Setting Input page, the authentication by the login password is required. When the entry of the password is requested, enter [root] for the user name and enter the password set at the Network Setting Input page.
-
Page 35: Initialization Of The Network Settings
Initialization of the network settings If the connection from the network is disabled due to destruction of the network settings or disremembering of the set value, reset the settings to the factory settings by using the following procedure and then redo the settings: •... -
Page 36: Display Of Quasi-Moving Images
Display of quasi-moving images When the link [LIVE] is clicked at the HV-800SX/8000SX/8500SX page, another window opens, and a quasi- moving live image is displayed. However, to display quasi-moving images, Java and JavaScript must have been set enabled. If the Presenter is used in the environment where Java or JavaScript are not set enabled, click the link [REFRESH]. -
Page 37: Operation Of Remote Control
ELMO. Note: For some FTP servers, the image may be unable to be saved by using this function. For the information of the applicable FTP servers, consult your dealer or an authorized ELMO service center. - 41 -... -
Page 38: Setting Up
Setting up • Start the Web browser from the host connected to the Presenter. • Enter the IP address or host name (if allocated) of the Presenter, following [http://], in the address column of the Web browser provided for entering the URL to be opened. -
Page 39: Operation
– Performing remote operation and acquiring the status This Presenter can be remotely controlled and its status can be acquired through telnet. For the information of the command, etc., consult your dealer or an authorized ELMO service center. - 43 -... -
Page 40: Appendix
Appendix Setting items of the network Item Outline The IP address of the Presenter. IP Address Specifies the value allocated by the administrator of the network in use. Factory set to 192.168.0.100. The mask value for separating the network address from the host address. Subnet mask Used in combination with the IP address to specify the network to which this Presenter belongs.Specifies the value allocated by the administrator of the network in use. -
Page 41: Specifications Of The Ftp Server
Specifications of the FTP server Port: No. 21 Connection time-out: 15min Number of connections at the same time: 1 Corresponding command Command Operation Response USER To enter the user name 331, 500, 530 PASS To enter the password 230, 500, 503, 530 PORT To notify the data port No. -
Page 42: Rs-232C Specifications
10. RS-232C SPECIFICATIONS The Presenter can be controlled by a PC connected to the Presenter through the RS- 232C terminal [RS-232C]. Setting up (1) Connect the Presenter to a PC with an RS-232C connection cable. Note: When using an RS-232C cable available in the market, make sure of the connection shown the next page. -
Page 43: Table Of The Communication Commands
Table of the communication commands Function Command Parameter Data Comments Auto Focus Command to execute the one-step Auto Focus. Focus ( NEAR ) Command to adjust the Focus. ( FAR ) adjustment ( STOP ) ( TELE ) Zoom Command to adjust the Zoom. ( WIDE ) adjustment ( STOP ) -
Page 44: Data Format Specifications
Function Command Parameter Data Comments ( 1.0 ) Gamma switch Command to switch the gamma set value of ( 0.9 ) the image. ( 0.8 ) ( 0.7 ) ( 0.6 ) ( 0.5 ) ( 0.4 ) ( 0.3 ) ( OFF ) Image rotation Command to rotate the image. -
Page 45: Visual Presenter)
Transmission Command (PC Visual Presenter) Each operation command is executed in ASCII code, and transmitted in a set of 7 bytes as follows: Command Parameter Data ( PC ) ( Visual Presenter ) Response data format (Visual Presenter All response data is transmitted as ASCII code, and it coverds parameter of the table of operation command. -
Page 46: Transmission Specifications
Transmission specifications • Full duplex start-stop sync. mode • Start bit : 1 bit • Data bit : 8 bits • Stop bit : 1 bit • Parity bit : None • X parameter : None • Baud rate (Communication speed) : 9600bps Connection If the RS-232C cable is not correctly connected between the Presenter and the PC, no acknowledgement is transmitted.Connect the RS-232C cable correctly, and fix it firmly... -
Page 47: Troubleshooting Hints
The lighting lamps (fluorescent lamps) are expendables. When any of them begins to shimmer or be less bright, replace it. Note: For the replacement of the lamp, consult your dealer from whom you have purchased your Visual Presenter or an authorized ELMO service center. - 51 -... -
Page 48: Specifications
12. SPECIFICATIONS General Item Specifications Power source AC100-240V 50Hz/60Hz Power consumption 0.7A-0.3A 533mm(W) X 449mm(D) X 185mm(H) (21.0 X 17.7 X 7.3 in) (When folded) Outside dimensions 766mm(W) X 449mm(D) X 628mm(H) (30.2 X 7.7 X 24.7 in) (When set up) Weight 10.5kg (23.2lbs) (main body only) Input selection... -
Page 49: Main Camera
Main camera Item Specifications Lens f = 7.2 - 72mm (10 - time zoom), F2.8 Shooting speed 7.5 frames / sec 362mm(H) X 290mm(V) (14.3 X 10.2 in) max. Shooting area 40mm(H) X 32mm(V) (1.6 X 1.3 in) min. Limit of focus From the stage surface to 100mm (3.9 in) above the stage surface adjustment Zooming... -
Page 50: Lighting
VESA is a registered trademark of Video Electronics Standards Association. VGA, SVGA, XGA and SXGA are trademarks or registered trademarks of International Business Machines Corporation. ELMO, FOCUSFREE are trademarks of ELMO Co., Ltd. Windows is a registered trademark of Microsoft Corporation, USA in the U.S. and other countries.
Need help?
Do you have a question about the HV-8500SX and is the answer not in the manual?
Questions and answers