Related Manuals for Elmo HV-7000SX
Summary of Contents for Elmo HV-7000SX
- Page 1 VISUAL PRESENTER INSTRUCTION MANUAL Please read this instruction manual carefully before using this Visual Presenter and keep it for future reference.
-
Page 2: Important Safeguards
IMPORTANT SAFEGUARDS Read Instructions All the safety and operating instructions should be read before the appliance is operated. Retain Instructions The safety and operating instructions should be retained for future reference. Heed Warnings All warnings on the product and in the operating instructions should be adhered to. - Page 3 Object and Liquid Entry Never push objects of any kind into this product through openings as they may touch dangerous voltage points or short-out parts that could result in a fire or electric shock. Never spill liquid of any kind on the product. Servicing Do not attempt to service this product yourself as opening or removing covers...
-
Page 4: Before You Use
BEFORE YOU USE Use the Visual Presenter under the rated electrical conditions. Do not leave the Presenter under direct sunlight or by heaters, or the Presenter may be discolored, deformed, or damaged. Do not place the Presenter in any humid, dusty, windy or vibrating location. Use the Presenter in the following environmental conditions: Temperature: 5°C~40°C (41°F~104°F) Humidity:... -
Page 5: Table Of Contents
Connection to the monitor and the projector........ - Page 6 7. OSD (On-Screen Display) ..........27 Main menu .
-
Page 7: Part Names And Functions
1. PART NAMES AND FUNCTIONS Appearance 6. Lighting Unit Arm 7. Lighting Unit 2. Column 4. Column Lock Release Button (Press this button to raise/fold the Column.) 1. Stage 3. Camera Head 8. Front Operation Panel 13. Mic Jack (MIC) 12. -
Page 8: Front Operation Panel
Front Operation Panel 19. Posi/Nega Conversion Button 17. Lighting Buttons 16. Magnification Button 20. Color/B&W Selection Button Part Name Magnification Button Lighting Buttons ], [ ] (Direction Buttons) Input Selection Buttons Main/Mode Button Posi/Nega Conversion Button ] (Direction Button) Color/B&W Selection Button ] (Direction Button) Zoom Buttons Pause Button... -
Page 9: Rear Panel
The optional LCD Color Monitor (LM-5011N) or ELMO Desk-top Presenter (HD-80XG) can be connected with the supplied DC cable. Note: Do not connect any equipment other than ELMO HD- 80XG. The light receiver of the wireless remote control. When operating the Presenter from behind, aim the wireless remote control at this light receiver. -
Page 10: Wireless Remote Control
Wireless Remote Control 40. MENU 41. POINTER 42. 2X 45. IMAGE ROTATION 46. POSI/NEGA 47. COLOR/B&W 50. MAIN/MODE 53. TELE 54. WIDE 58. IRIS NORMAL 60. IRIS CLOSE 59. IRIS OPEN 43. Directions 44. PAUSE 49. BASE 48. UPPER 52. RGB2 51. - Page 11 Button Name MENU POINTER Directions PAUSE IMAGE ROTATION POSI / NEGA COLOR / B&W UPPER BASE MAIN/MODE RGB1 RGB2 TELE WIDE NEAR IRIS NORMAL IRIS OPEN IRIS CLOSE Function To call the OSD (On-Screen Display) menu, and to fix the settings. To display the pointer on the screen.
-
Page 12: Wireless Remote Control
2. WIRELESS REMOTE CONTROL Point the infrared emitting part of the wireless remote control unit at the infrared sensor of the Presenter, located at the front, and the rear panel, and press the button for the desired function. The infrared sensor at fhe front can receive the infrared light if it comes from the wireless remote control within 7 meters at an angle of 30 degrees or less right and left. -
Page 13: Ssetting Up
4. SETTING UP (1) Unfold the lighting unit arms fully until they come to the deadend. Unfold arm 1 and then arm 2 as illustrated. (2) Press the column lock release button, and raise the column until the column lock release button returns to the original position. -
Page 14: Connection To The Monitor And The Projector
If the display image shifts from the center, manually adjust the horizontal/vertical positions through the connected equipment. If vertical stripes appear on the screen with the use of video projector, it may be improved by manually adjusting the dot-clock frequency of the projector. -
Page 15: Rgb Input Signal
RGB input signal Signal assignment 10 9 DSUB 15P shrinking terminal (Female) Pin arrangement Pin No. Name Video input (Red) Video input (Green) Video input (Blue) RGBoutput signal Signal assignment (DSUB 15P shrinking terminal) Pin No. Name Video output (Red) Video output (Green) Video output (Blue) Connection of analog RGB cable... -
Page 16: Restrictions On Signal Outputs (Rgb Composite Video, S-Video)
Restrictions on signal outputs (RGB, Composite video, S-video) Note: The specifications with " " are not effective. Normal mode Posi/Nega selection Color/B&W selection Electric Zoom Resolution selection Image rotation White balance Microphone volume Aperture selection Gamma selection 1 In operating the buttons on the front operation panel, the scroll function is prioritized. 2 Pausing is released. -
Page 17: Connecting The Desk-Top Presenter (Hd-85Xg)
Connecting the Desk-Top Presenter (HD-80XG) Use the DC OUT socket of the unit to connect ELMO HD-80XG. AC IN OUTPUT 0.9A DC OUT socket Note: When using the DC cable (supplied), AC adapter supplied with LM-5011N/HD-80XG is not used. RGB cable for HD-80XG... -
Page 18: Operation Procedures
5. OPERATION PROCEDURES Simple steps for presenting printed material (1) Turn ON the power switch. · Notes: Before turning ON the power switch, connection to the monitor should have been completed. · The indication lamp (green LED) on the front operation panel shows the initial setting condition of each function of the Presenter. -
Page 19: Simple Steps For Showing Transparent Material, Such As Overhead Transparency Or Slide Film
Simple steps for showing transparent material, such as overhead transparency or slide film (1) Press the base button [BASE] on the front operation panel or wireless remote control. The indicator of the base button [BASE] will blink, and the built-in baselight will light up. (2) To present a nega film, press the posi/nega conversion button [POSI/NEGA] on the front operation panel or wireless remote control to change the mode to nega. -
Page 20: Storing The Presenter
Storing the Presenter Note: The Presenter can not be stored with the LCD monitor (optional) attached. Before storing, detach the LCD monitor (optional) and monitor bracket (optional), if connected. (1) Turn OFF the power switch, and unplug the power cord and the video cable. -
Page 21: Various Functions
Input selection The respective images from two different AV sources, such as PC and ELMO Presenters [HD-80XG], can be alternately presented on the Monitor by simply selecting the AV source by pressing the input selection button without changing cable connections. -
Page 22: Table Of Video-In/Out Terminal Selections
Table of video-in/out terminal selections Output signal Input Main camera video signal Mic. Monaural Main cameravideo signal Ext. video signal1 RGB1 Ext. audio signal1 Stereo1 (L / R) Mic. Monaural Main cameravideo signal Ext. video signal2 RGB2 Ext. audio signal2 Stereo2 (L / R) Mic. -
Page 23: Zoom
Zoom Press the zoom button [TELE] on the front operation panel or wireless remote control, and the image will gradually be enlarged. Press the zoom button [WIDE] on the front operation panel or wireless remote control, and the image will be gradually reduced. -
Page 24: Powered Manual Focus
The Presenter features a one-push auto focus function. Once focusing is completed, the auto focus function is released, and the focused position maintains unchanged. (FOCUSFREE) To obtain sharper image, zoom in on the object in the auto- focus mode while pressing the zoom button [TELE] on the front operation panel or wireless remote control. -
Page 25: Posi/Nega Conversion
Posi/Nega conversion To show a negative film. Press the posi/nega conversion button [POSI / NEGA] on the front operation panel or wireless remote control, and the image will be converted accordingly. To return to the normal (POSI) mode, press the posi/nega conversion button [POSI / NEGA] again. -
Page 26: Iris
Iris The iris can be manually adjusted. To open the iris, press the manual iris button [OPEN]. To close the iris, press the manual iris button [CLOSE]. In the manual mode, the iris is fixed regardless of the change in lightness of object. -
Page 27: Enlarging The Image
Enlarging the image To double the image. When the button [2X] on the front operation panel or wireless remote control is pressed or the right button of the mouse is clicked, the image is doubled, and at the same time, the scrolling (moving) pointer appears. -
Page 28: Osd (On-Screen Display)
For the information how to operate the pointer, refer to P.25. Note: The OSD is supposed to be used in a large projection size with a projector or the like. If the OSD is used on an LCD monitor or a TV screen, the display may not be clearly seen. -
Page 29: Main Menu
Main menu The main menu items can be set also from the front operation panel of the main body or the remote control. Icon Name Upper lighting unit ON/OFF Base lighting unit ON/OFF Posi/Nega selection Color/B&W selection Pause Image rotation Auto focus Function To turn ON/OFF the upper lighting unit. -
Page 30: Set Menu
Icon Name Zoom TELE/WIDE Focus NEAR/FAR Iris OPEN/CLOSE Pointer Set menu Icon Name White balance Auto Manual One push Function The image size is adjusted. When this icon is held down with the mouse, the zoom lens is activated. The focus is adjusted. When this icon is held down with the mouse, the focus is activated. - Page 31 Icon Name Volume adjustment (0 ~ 63) Aperture selection Gamma selection ON/OFF NTSC/PAL selection NTSC/PAL USB/RS-232C selection USB/RS-232C Status saving Initialization Function The sound volume from the microphone jack is adjusted. When the set menu is displayed for the first time, the previous volume setting is maintained.
-
Page 32: Rs-232C Specifications
8. RS-232C SPECIFICATIONS The Presenter can be controlled by a PC connected to the Presenter through the RS-232C terminal [RS-232C]. Setting up Connect the Presenter to a PC with an RS-232C connection cable. Note: When using an RS-232C cable available in the market, make sure of the connection shown in the page. Note: To protect the Presenter and the PC, be sure to turn OFF all the power switches of all equipment before connecting. -
Page 33: Table Of The Communication Commands
Table of the communication commands Command Parameter Data Function Auto Focus Focus + (NEAR) adjustment – (FAR) 0 (STOP) Zoom + (TELE) adjustment – (WIDE) 0 (STOP) Iris adjustment + (OPEN) – (CLOSE) 0 (STOP) 1 (AUTO) Lighting 0 (OFF) selection 1 (BASE) 2 (UPPER) -
Page 34: Data Format Specifications
Command Parameter Data Function Resolution 0 (VGA) selection 1 (SVGA) 2 (XGA) 3 (SXGA) Gamma 0 (1.0) selection 1 (0.6) Image rotation 0 (OFF) 1 (90°) 2 (180°) 3 (270°) Aparture 0 (OFF) selection 1 (ON) Default Status request ROM version Acknowledge 0 (OFF) check... -
Page 35: Response Data Format
Response data format (Visual Presenter All response data are sent in the ASCII code in correspondence to the parameters in the list of operation commands. · Status request format (Parameter 0) Lighting Input selection selection · Status request format (Parameter 2) Resolution Gamma selection... -
Page 36: Troubleshooting Hints
Moire pattern appears on the screen image Brightness tone is off the setting If the trouble still remains after checking the above, consult your dealer or an authorized ELMO service center. Possible cause/countermeasure • Cable is not properly connected to the video-in terminal of monitor. -
Page 37: Specifications
10. SPECIFICATIONS General Item Power source AC120V 60Hz Power consumption AC outlet 1 pce. (Max. 400W/Unswitched) DC output terminal DC12V (Max. 0.9A) Outside dimensions 400mm(W) X 655mm(D) X 187mm(H) (15.7 X 25.8 X 7.4 in.) - When folded 700mm(W) X 542mm(D) X 615mm(H) (27.6 X 21.3 X 24.2 in.) - When set up Weight 10 kgs (22.1 lbs) (main body only) Input selection... -
Page 38: Camera
Camera Item Lens f=7.2~72mm(10-time zoom) F2.8 Shooting speed 7.5 frames / sec Shooting area 362mm x 290mm (14.3 X 11.4 in.) max., 40mm x 32mm (1.5 X 1.2 in.) min. Limit of focus adjustment At the range of stage surface~100mm from the stage surface Zoom Powered (with double speed function) Focusing... -
Page 39: Lighting
The specifications are subject to change without notice. Dimensions and weight are approximate. Trademark Acknowledgements VESA is a registered trademark of Video Electronics Standards Association. ELMO, VISUAL PRESENTER/Visual Presenter, FOCUSFREE, Image Mate are registered trademarks of Elmo Co., Ltd. Specifications Name Quantity... - Page 40 Elmo Mfg. Corp. 1478 Old Country Road, Plainview, NY 11803-5034 Tel : (516)501-1400 E-mail : elmo@elmousa.com web : http://www.elmousa.com/ Canada Elmo Canada Mfg. Corp. 44 West Drive, Brampton, Ontario L6T 3T6 Tel : (905)453-7880 E-mail : info@elmocanada.com Web : http://www.elmocanada.com/ Germany Elmo (Europe) G.m.b.H...
Need help?
Do you have a question about the HV-7000SX and is the answer not in the manual?
Questions and answers