Assembling The Centrifugal Clutch; Dismantling The Oil Pump And Screen - RedMax GZ3500T Workshop Manual

7.10 Assembling the centrifugal clutch

1
Hook the springs into the clutch shoes. Press in
the clutch hub from above while bending back the
clutch shoes around the clutch hub as shown in
figures 23 and 24.
2
Fit the clutch by turning it counter clockwise.
3
Reinstall the spark plug.
4
Assemble the clutch cover, chain and bar.
7.11 Dismantling the oil pump and
screen
1
Dismantle the centrifugal clutch as in the chapter
"Dismantling the centrifugal clutch".
2
Dismantle the vibration element from the tank unit.
3
Unscrew the screw B. Remove the chain guide
plate. Unscrew the screw A and pump drive wheel
C and then lift of the cover.
4
Unscrew the screws D.
Fig 23
Fig 24
Fig 25
Fig 26
Fig 27
Repair instructions
33
English –