6.9 Dismantling the throttle lockout,
throttle and spring
1
Unscrew the air filter housing, the air filter holder
and the filter. Dismantle the handle part by loo-
sening screws A. Remove the throttle lockout B.
Remove the throttle C and the spring D. Loosen
the carburettor screw E. Remove the guide F.
2
Remove the carburettor and the cover from the
choke outlet H.
3
Turn the throttle actuator rod downwards and guide
it out, see figure 30.
Cleaning and checking
•
Clean and check carefully all components.
Parts must be replaced if cracked or show
signs of other defects. Always use original
spare parts.
•
Check that the spring is intact and retains all its
tension.
Fig 28
Fig 29
Fig 30
Fig 31
Safety equipment
23
English –