Safety Equipment; Dismantling The Chain Brake - RedMax GZ3500T Workshop Manual

Hide thumbs Also See for GZ3500T:

Table of Contents

Release the brake by moving the kickback guard

backwards.

Loosen the bar nut and remove the clutch cover, chain

and bar.

Release the brake by pushing the kickback guard

forwards.

WARNING!

Exercise care to ensure the spring

does not fly out and causes perso-

nal injury. Wear protective goggles.

Secure a bolt in the vice, attain a distance of at

least 18 mm and approx. 40 cm from the vice, then

thread the clutch cover through the hole where the

bar bolt runs. Lock with the bar nut.

Loosen the screws and hold the cover in place with

one hand. Insert a screwdriver as illustrated over

the spring to prevent it from flying off when you lift

the cover.

Carefully bend upwards until the spring is released

and slides over the screwdriver.

6 Safety equipment

Fig 1

Fig 2

Fig 3

Fig 4

Fig 5

Safety equipment

English –

Table of Contents