Preparation; Power Cable Connections; Specifications - Canon CX-1 Operation Manual

4. Preparation

Please ask a Canon representative or distributor to perform installation of this instrument.

4.1 Power Cable Connections

WARNING
WARNING
CAUTION
CAUTION
1
Check that the power switch of the retinal camera is set to the O position (OFF).
2 Connect the power cable to the retinal camera.
Insert the power cable connector firmly into the AC
power connector while holding down the retinal
camera with your hand.
3
Insert the power plug into the AC outlet.
Insert the plug all the way into the AC outlet.
Be sure to operate this instrument using the power supply described in the
specifications. Otherwise, it may result in fire or electric shock.
Be sure to turn OFF the power before plugging or unplugging the cables as
indicated in this manual. Also, do not handle it with wet hands. Otherwise,
you may get an electric shock that may result in death or serious injury.
Before connecting or disconnecting the cables, be sure to hold the
instrument firmly in order to ensure safety.
Otherwise, the main unit may fall over, possibly causing injury.
Always use a grounded AC outlet for a 3-pin plug as the power outlet.
-8-