Fujitsu Stylistic LT C-500 Instructions page 2

58-0578-01.fm Page 2 Tuesday, August 21, 2001 2:52 PM
Installation Instructions
An adhesive band secures the screen protector to the
protective strip around the entire perimeter except for
one corner. Hold it up to a light to see which corner does
not have the adhesive strip. (See Figure 1).
1. Peel the protective film from the adhesive side of the
screen protector, as shown in Figure 1.
Adhesive
strip
No Adhesive
Figure 1. Peeling Protective Film
2. Install the screen protector on the pen tablet display
screen. Apply the adhesive side to the screen with the
glueless corner in the lower left, as shown in Figure 2.
3. Apply pressure along the edges of the screen protector
with your finger. (Avoid lifting the screen protector
from the screen after installation. The adhesive requires
48 hours to cure properly.)
2
Note