Download Print this page

Fujitsu Stylistic LT C-500 Installation Manual

Slipcase for stylistic lt c-500
Hide thumbs Also See for Stylistic LT C-500:



Installation Guide

Stylistic LT C-500
These instructions provide details on using the
FMWCC44 slipcase. This case is designed for use
with your pen tablet. The slipcase provides added
protection when transporting, using, or storing the
pen tablet.
Note: Prior to installing your pen tablet in the
slipcase, be sure to install a screen protector on
the screen. It is difficult to install a screen
protector once the system is in the slipcase.
To install your pen tablet into the slipcase, open
the top flap of the slipcase. The flap is secured by
three snaps and a Velcro
Figure 1. Stylistic LT C-500 Slipcase - Rear
Stylistic LT C-500 is a trademark and Fujitsu is a registered trademark of Fujitsu Ltd. © 2000 Fujitsu PC Corporation
strip (see Figure 1).
Slide the pen tablet into the case, bottom first, with the
screen facing the open window (see Figure 2). Reattach
the flap on the top of the slipcase.
Figure 2. Stylistic LT C-500 Slipcase - Front
To adjust the fit of the hand straps on the back of the
case, peel apart the two Velcro
comprising each strap. Adjust the length of the strap by
peeling the strap away from the flap and adjusting it to
the desired length.
To secure the shoulder strap, attach the strap clips to
two of the D-rings. The slipcase can be carried
vertically or horizontally, depending on how you orient
the clips.
(4 places)
backed flaps



This manual is also suitable for: