Error Codes; Other - acaia Pearl User Manual

Error Codes

Error Code Description
Access Code Error, unrecognized access code.
Error 100
EEPROM error, unable to access memory. Please contact Acaia support.
Error 101
AD error, unable to access weighing signal. Please contact Acaia support.
Error 102
Unable to find acceptable starting Zero point, most likely due to damage
Error 303
of the loadcell by excessive force or drop. Please contact Acaia support.
Over load: the weight is over the maximum capacity.
Under load: the weight is under the minimum capacity.
Calibration error. Calibration cannot proceed when environmental noises
Error 304
are too strong. Please calibrate in a stable environment free of wind,
vibration, etc.
Unable to tare because the weight exceeds the acceptable tare range.
Error 802
Unable to tare because the weight is unstable.
Error 803
Passcode error (the default passcode is 0000)
Error 900

Other

Display Code Description
The scale is in update mode. During the update process, the orange LED
will blink until the process is complete.
UPDATE
Note: If you want to leave update mode, please connect the scale's USB to a
power source.
14