Error Codes; Other - acaia Pearl User Manual

Error Codes

Error Code Description
Error 100 Access code error, unrecognized access code.
Error 101 EEPROM error, unable to access memory. Please contact Acaia support.
Error 102 AD error, unable to access weighing signal. Please contact Acaia support.
Error 303
has been damaged by excessive force or drop. Please contact Acaia support.
Overload: weight exceeds maximum capacity.
Underload: weight below minimum capacity.
Calibration error. Calibration cannot proceed when environmental noises are too
Error 304
strong. Please calibrate in a stable environment free of wind, vibration, etc.
Error 802 Unable to tare because the weight exceeds the acceptable tare range.
Error 803 Unable to tare because the weight is unstable.
Error 900 Passcode error (the default passcode is 0000)

Other

Display Code Description
The scale is in update mode. During the update process, the data transfer
UPDATE
power source. The scale will power off automatically if the update process does
not begin shortly.
16