Black & Decker KC360NM Manual page 9

Accessories
The performance of your tool depends on the accessory used. Black & Decker and Piranha
accessories are engineered to high quality standards and designed to enhance the performance
of your tool. By using these accessories you will get the very best from your tool.
This tool uses screwdriver bits with a 1/4" (6.35 mm) hexagonal shank. Piranha Super-lok
accessories are designed for use with this tool.
Maintenance
Your Black & Decker tool has been designed to operate over a long period of time with a
minimum of maintenance. Continuous satisfactory operation depends upon proper tool care
and regular cleaning.
Your charger does not require any maintenance apart from regular cleaning.
Warning! Before performing any maintenance on the tool, remove the battery from the tool.
Unplug the charger before cleaning it.
Regularly clean the ventilation slots in your tool and charger using a soft brush or dry

cloth.
Regularly clean the motor housing using a damp cloth. Do not use any abrasive or

solvent-based cleaner.
Protecting the environment
Separate collection. This product must not be disposed of with normal household
waste.
Should you find one day that your Black & Decker product needs replacement, or if it is of no
further use to you, do not dispose of it with household waste. Make this product available for
separate collection.
Separate collection of used products and packaging allows materials to be
recycled and used again. Re-use of recycled materials helps prevent
environmental pollution and reduces the demand for raw materials.
Local regulations may provide for separate collection of electrical products from the
household, at municipal waste sites or by the retailer when you purchase a new product.
ENGLISH
9