Related Manuals for Black & Decker KFBCD600
Summary of Contents for Black & Decker KFBCD600
- Page 1 KFBCD600 www.blackanddecker.co.uk www.blackanddecker.co.uk www.blackanddecker.co.uk...
- Page 2 ENGLISH ENGLISH ENGLISH (Original instructions) (Original instructions) (Original instructions)
-
Page 3: Safety Instructions
Intended use 3. Personal safety a. Stay alert, watch what you are doing and use common Your BLACK+DECKER KFBCD600 - Drill, has been sense when operating a power tool. Do not use a designed for screwdriving applications and for drilling in power tool while you are tired or under the influence wood, metal and plastics. - Page 4 ENGLISH (Original instructions) e. Maintain power tools. Check for misalignment or Hold power tool by insulated gripping surfaces, when binding of moving parts, breakage of parts and any performing an operation where the fastener may other condition that may affect the power tools contact hidden wiring.
- Page 5 (Original instructions) ENGLISH Warning! The vibration emission value during actual use of Electrical safety the power tool can differ from the declared value depending Your charger is double insulated; therefore no on the ways in which the tool is used. The vibration level may earth wire is required.
-
Page 6: Troubleshooting
ENGLISH (Original instructions) Installing and removing the battery pack from the Grasp the rear half of the chuck with one hand and use tool (fig. B) your other hand to rotate the front half in the counterclockwise direction, as viewed from the chuck end. Warning! Make certain the lock-off button is engaged to Insert the bit or other accessory fully into the chuck, and prevent switch actuation before removing or installing battery. -
Page 7: Maintenance
Problem Possible cause Possible solution Battery pack will not Charger not plugged Plug charger into a work- charge. ing outlet. KFBCD600 Voltage 10.8 Surrounding air Move charger and battery temperature too hot or pack to a surrounding air 0-550rpm too cold. - Page 8 MACHINERY DIRECTIVE Input voltage 10.8 Output voltage Current Approx. charge time Hours Charger KFBCD600 - Drill, Screwdriver Input voltage 10.8 Output voltage Black & Decker declares that these products described under Current "technical data" are in compliance with: Approx. charge time...
- Page 9 (Original instructions) ENGLISH Guarantee Black & Decker is confident of the quality of its products and offers consumers a 24 month guarantee from the date of purchase. This guarantee is in addition to and in no way prejudices your statutory rights. The guarantee is valid within the territories of the Member States of the European Union and the European Free Trade Area.
- Page 10 ENGLISH (Original instructions)
- Page 11 (Original instructions) ENGLISH...
- Page 12 Australia Black & Decker (Australia) Pty. Ltd. Tel. 03-8720 5100 20 Fletcher Road, Mooroolbark, 03-9727 5940 Victoria, 3138 New Zealand Black & Decker Tel. +64 9 259 1133 5 Te Apunga Place +64 9 259 1122 Mt Wellington Aukland 1060 United Kingdom &...