Black & Decker KD1250 Original Instructions Manual
Black & Decker KD1250 Original Instructions Manual

Black & Decker KD1250 Original Instructions Manual

Hide thumbs Also See for KD1250:

Advertisement

Australia
New Zealand
KD1250

Advertisement

Table of Contents
loading

Summary of Contents for Black & Decker KD1250

  • Page 1 Australia New Zealand KD1250...
  • Page 4: Intended Use

    ENGLISH (Original instructions) Intended use f. If operating a power tool in a damp location is unavoidable, use a residual current device (RCD) Your Black & Decker rotary hammer drill has been designed protected supply. Use of an RCD reduces the risk of for drilling in wood, metal, plastics, and masonry as well as electric shock.
  • Page 5: Residual Risks

    (Original instructions) ENGLISH d. Store idle power tools out of the reach of children and This tool is not intended for use by persons (including do not allow persons unfamiliar with the power tool or children) with reduced physical, sensory or mental capa- these instructions to operate the power tool.
  • Page 6: Electrical Safety

    ENGLISH (Original instructions) Fitting and setting the depth stop (fig. A) Warning! The vibration emission value during actual use of the power tool can differ from the declared value depending Slacken the knob (9). on the ways in which the tool is used. The vibration level may Insert the depth stop (7) into the mounting hole as shown.
  • Page 7: Protecting The Environment

    (Original instructions) ENGLISH Hammer drilling Regularly open the chuck and tap it to remove any dust For hammer drilling in masonry and concrete, set the operating mode selector (4) to the position and the Protecting the environment drilling mode selector (3) to the position.
  • Page 8: Technical Data

    ENGLISH (Original instructions) Technical data KD1250 (Type 1) Input voltage Power input 1250 No-load speed 0-850 Impact rate 0-4100 Impact energy per stroke according to EPTA-Procedure 05/2009 Weight Max. drilling capacity Concrete Steel Wood Level of sound pressure according to EN 60745:...
  • Page 9 (Original instructions) ENGLISH...
  • Page 11 ENGLISH...
  • Page 12 Australia & New Zealand Stanley Black & Decker 82 Taryn Drive, Epping, VIC 3076 Australia Tel.1800 338 002 (Aust) or Tel. 0800 339 258 (NZ) United Kingdom Black & Decker Tel. 01753 511234 210 Bath Road Fax 01753 551155 Slough, Berkshire SL1 3YD 08/2013...

Table of Contents