Intended use If operating a power tool in a damp location is unavoidable, use a Residual Current Device (RCD) Your Black & Decker drill has been designed for drilling in protected supply. Use of an RCD reduces the risk of wood, metal and plastics and masonry.
d. Store idle power tools out of the reach of children The intended use is described in this instruction manual. and do not allow persons unfamiliar with the power The use of any accessory or attachment or performance tool or these instructions to operate the power tool. of any operation with this tool other than those Power tools are dangerous in the hands of untrained recommended in this instruction manual may present a...
Features Selecting the drilling mode For drilling in masonry, set the drilling mode selector (3) 1. On/off switch to the position. 2. Lock-on button For drilling in other materials and for screwdriving, set 3. Drilling mode selector the drilling mode selector to the position.
Protecting the environment Technical data CD504 KR454 KR504 TYPE 1 TYPE 1 TYPE 1 Input voltage Vac 230 Power input W 500 Separate collection. This product must not be No load speed 2800 2800 2800 disposed of with normal household waste.
Australia & New Zealand Stanley Black & Decker 82 Taryn Drive, Epping, VIC 3076 Australia Tel.1800 338 002 (Aust) or Tel. 0800 339 258 (NZ) 90611887 05/14...