Cisco 7905 Quick Reference Manual page 5

Use the To activate the Monitor:
Monitor? • During a call press the Monitor soft
To switch from the Monitor to the
handset:
• Pick up the handset
•
To turn off the Monitor and hang up:
• Press the EndCall soft key.
To adjust the Monitor volume:
• Press the up or down Volume button
• Press the Save soft key to save your
Operate the To control the cursor:
LCD Screen? • Press the >> soft key to re-position
• Press the << soft key to delete a
To select a menu item:
• Press the Navigation button to select
• Press the number key on your
Adjust the • Press the Menu button.
LCD • Select Settings from the menu.
Contrast? • Select User Preferences (7911 only)
• Select Contrast from the menu.
• Press the Up or Down soft keys to set
• Press the Ok soft key to accept your
Document located within technology services on NTU.ac.uk
- 5 -
All manuals and user guides at all-guides.com
key and hang up the handset. (You will
be able to hear the call, but you will
not be able to talk on the call.)
when the Monitor is in use.
change.
the cursor.
character or digit in an entry.
(highlight) a menu item. Then press
the Select soft key.
OR
phone's dial pad that corresponds to
the item number in the menu.
the desired contrast.
changes.
You can use the
monitor to listen to a
call. To talk on a call,
you must pick up the
handset.
Operating your phone's
LCD screen is easy.
Use the Navigation
button, soft keys, and
the keypad to make
your selections.
Tip: To exit out of a
menu on your phone's
LCD screen, press the
Exit soft key.