Safety Warnings; Description Of Main Parts - BorMann Pro BIW1540 User Manual

EN

Safety warnings

During the welding process, there maybe certain security risks to the users .learning to take necessary protective measures is very important. Details please
refer to personnel safety protective guidelines, which is comply with the requirements of the manufacturer accident prevention.
Professional skills need to be trained, with which the users are capable to operate the equipment.
● Wearing safety gear when welding, which is approved by the national safety supervision department
● Avoid excessive work, take necessary rest.
Electric shock may result in serious injury or even death!
● Please install grounding device according to the application standard.
● Don not contact live parts with bare skins, or when wearing wet clothing.
● Make sure you are insulated from ground and work-piece
● Before working, make sure your situation is safe.
Smoke may be harmful to health!
● Keep safe distance with smoke, avoid directly breathing welding fumes.
● Please weld where there is ventilation or air circulated.
Arc light may damage your eyes or burn bare skins!
● Wearing protective clothing like glasses, mask, gloves, boots, etc. To protect eyes and skins from arc light.
● For bystanders as well.
Improper operation may cause fire or explosion.
● Welding spark may lead to fire, please ensure there is no flammables nearby.
● Make sure there is fire extinguishing device in the neighbourhood, and who is skilled to use it in working areas.
● Do not weld in sealed container
● Never use the machine for pipeline thawing.
Thermal parts can cause serious burns
● Do not touch the thermal parts.
● In continuous using, please always keep to have a cooling time.
Excessive noise may be harmful to hearing.
● Please protect your ears, use ear shield or earplugs if necessary.
● For bystanders as well.
Magnetic field is effective to heart pacemaker.
● Before consulting a physician, users with pacemaker must keep far away from the welding areas.
Moving parts may cause injury.
● Keep safe distance to moving parts such as the fan.
● All kinds of doors, panel, cover, baffle plate and protective device should be closed and put to the right place.
Ask for professional help with machine fault if needed.
● Normal faults please refer to the manual.
● If you are unable to solve the problem on your own, please seek for professional help from the supplier or manufacturer.
Remark: the welder must be placed horizontally, laying place slope not exceeding 15°.

Description of main parts

1. Electrode holder clamp socket (+) 9. Arc Force adjusting knob
2. Display screen
3. Welding current adjusting knob
4. Ventilation ports
5. Earth clamp connecting socket (-)
6. Fan
7. ON/OFF switch
8. Power cable
Installation and operating instructions
Warning: -Please strictly refer to the following steps to connect the equipment.
-- Avoid using the machine under rains.
-- Before using. Please measure the input voltage to see if it is under machine usable voltage range (200V-240V), otherwise will damage the welder.
● The electrode holder and earth clamp are easily connected to the machine by inserting the quick connector and twisting it clockwise.
Always ensure a correct fit .Please pay attention to the connection polarity.
Generally, Reverse Polarity is used in which the welders electrode holder will be connected in the " ". Positive Terminal - while the earth clamp in the "+" Neg-
ative Terminal. The welder does have the ability to be used for Straight Polarity or Reverse Polarity, We recommend you connect the polarity in accordance
with the Manufacturers recommendations. If the polarity is connected incorrectly it will cause an unstable arc, spatter, and or the electrode to stick. If these
symptoms occur change the polarity.
● Turn the machine on via the ON/OFF switch located on the rear of the machine.
● Set the amperage knob according to type and size of welding rod being used.
3
WWW.BORMANNTOOLS.COM