Dial Up Cellular Module - Asus AAEON SRG-ACAN User Manual

3.4.2

Dial Up Cellular Module

Step 1: Follow the steps in the previous section to check the cellular module status. The
system should return a state of "registered" under Status if the module is ready to use.
If there is an issue, the state will show "failed" along with a failed reason such as "sim
missing".
Step 2: Enable the cellular module with the following command:
$ mmcli -m 0 -e
System will return the following if successful:
Step 3: Dial up the cellular module with the following command:
$ nmcli con up id Modem
System will return the following:
Step 4: You can check the cellular module connection with the command:
$ ifconfig
Chapter 3 – Gateway Setup and Configuration 21