Wi-Fi And Bluetooth Network Settings; Scan For Wi-Fi Access Points; Connect To Wi-Fi Access Point - Asus AAEON SRG-ACAN User Manual

3.5

Wi-Fi and Bluetooth Network Settings

This section details how to check and setup Wi-Fi and Bluetooth wireless networks.
3.5.1

Scan for Wi-Fi Access Points

To scan for Wi-Fi access points, enter the following command:
$ nmcli dev wifi
The system will return a list of Wi-Fi networks with their name, signal strength and
security type.
3.5.2

Connect to Wi-Fi Access Point

To connect to a Wi-Fi network, enter the following command
$ nmcli dev wifi connect
SSID is the name of the network you want to connect to
PASSWORD
The system will show the following if successful:
Chapter 3 – Gateway Setup and Configuration
is the network password for the chosen SSID
'SSID' password 'PASSWORD'
22