Set Dynamic Ip - Asus AAEON SRG-ACAN User Manual

3.3.3

Set Dynamic IP

Step 1: Enter edit mode with the following command:
$ nmcli con edit
See table in 3.3.1 for NETWORKPROFILE values
Command should return the following
Step 2: Edit the IP address with the following commands:
$ nmcli> goto ipv4
$ nmcli> remove address
$ nmcli> save
$ nmcli> quit
You have now exited edit mode
The following should be returned:
Chapter 3 – Gateway Setup and Configuration
NETWORKPROFILE
(Ethernet0 used in this example):
19