Table of Contents
Advertisement
3.1
Connecting to System
When connecting a PC or laptop to the SRG-ACAN system, it is recommended to use
PuTTY with Windows 10. Users can download the software from the PuTTY website.
https://www.putty.org/
For Windows 7 or older, users must first set up their PC to recognize the system. The
following instructions detail how to set up your PC to connect to the SRG-ACAN system
by installing the CDC Serial Driver. The CDC Serial Driver can be downloaded from the
SRG-ACAN product page on AAEON.com
Step 1: Download the PuTTY software.
Step 2: Connect the host PC to the gateway with a USB cable to the Micro USB port.
Step 3: Open Device Manager and locate Multifunction Composite Gadget. Double
click on the device. A pop-up should appear, with a notice that the CDC Serial is
unrecognized.
Chapter 3 – Gateway Setup and Configuration
13
Advertisement
Table of Contents
