Port Replicator Problems; Floppy Disk Drive Problems; Hard Drive Problems; Keyboard Or Mouse Problems - Fujitsu Lifebook S7110 User Manual

S7110.book Page 59 Monday, March 20, 2006 1:56 PM
Problem
The Media Player Drive The Windows DVD/CD-RW/
Access indicator on the CD-ROM auto insertion func-
Status Indicator Panel tion is active and is checking to
blinks at regular intervals see if a disc is ready to run.
when no disc is in the tray
or the optical drive is not
installed.

Port Replicator Problems

Note: Be sure to power down your LifeBook notebook before adding a printer to the Port Replicator parallel port.
LifeBook notebook does Port Replicator AC adapter is
not turn on when installed not plugged in.
in the optional Port
Notebook is not properly
Replicator
seated in the Port Replicator.

Floppy Disk Drive Problems

You cannot access your You tried to write to a write
floppy disk. protected floppy disk.
Floppy disk is not loaded
correctly.
The floppy disk drive may not
be properly installed.
Security is set to protect access
to floppy disk data.

Hard Drive Problems

You cannot access your The setup utility is incorrectly
hard drive. set for your internal (Primary
Master) or optional second
hard drive (Primary Slave).
The wrong drive designator
was used by an application
when a bootable CD-ROM was
used to start the notebook.
Security is set so your oper-
ating system cannot be started
without a password.

Keyboard or Mouse Problems

The built-in keyboard does The notebook has gone into
not seem to work. Standby mode.
Your application has locked
out your keyboard.
You have installed an Your external device is not
external keyboard or properly installed.
mouse, and it does not
seem to work.
Possible Cause
This is normal; however, you may disable this feature.
Provide power to the Port Replicator.
Remove and re-dock your LifeBook notebook.
Eject the floppy disk and set it to write enable.
(See Preparing a Disk for Use on page 42 for more
information)
Eject floppy disk, check orientation and re-insert.
(See Ejecting a Disk on page 42 for more information)
Remove and re-install your floppy disk drive.
Verify your password and security settings.
Revise BIOS settings to set both Primary Master
and Primary Slave correctly. (See BIOS Setup Utility
on page 29 for more information)
Verify drive designator used by application is in
use by the operating system. When the operating
system is booted from a CD, drive designations
are automatically adjusted.
Verify your password and security settings.
Push the Power/Suspend/Resume button.
Try to use your integrated pointing device to restart
your system.
Re-install your device. (See Device Ports on page 52
for more information)
T r o u b l e s h o o t i n g
Possible Solutions
59