Audio Problems; Port Replicator Problems; Hard Drive Problems - Fujitsu LIFEBOOK P702 User Manual

Problem

Audio Problems

There is no sound coming
from the built-in speaker.
Port Replicator Problems (optional external device)
System does not turn on
when installed in optional
Port Replicator

Hard Drive Problems

You cannot access your hard
drive.
Possible Cause
The volume is turned too low.
The software volume control is
set too low.
Headphones are plugged into
your notebook.
Software driver is not
configured correctly.
The speakers have been muted
using the Volume icon in the
system tray.
Port Replicator AC adapter is not
plugged in.
LIFEBOOK is not properly seated
in the Port Replicator.
The wrong drive designator was
used by an application when a
bootable disc was used to start
the notebook.
Security is set so your operating
system cannot be started with-
out a password.
Possible Solutions
Adjust the volume control on your notebook and operating system. Use the [Fn+F9]
key combination on your keyboard to increase the volume of your notebook.
Manually adjusting the volume (i.e., keyboard "hot keys") should dynamically adjust
the volume of the operating system (see above). If that doesn't work, adjust the
sound volume control settings in your software or application.
Plugging in headphones disables the built-in speakers. Remove the headphones.
The audio driver can be installed or reinstalled using the Bonus Apps utility (see
Installing Bonus Apps on page 49). Refer to application and operating system docu-
mentation.
Click the Volume icon in the system tray. If the Mute icon has a red circle on it, click
it to unselect it. Pressing [F3] while holding [Fn] will also toggle the audio on and
off.
Provide power to the Port Replicator.
Remove and re-dock your notebook.
Verify drive designator used by application is in use by the operating system. When
the operating system is booted from a CD, drive designations are automatically
adjusted.
Verify your password and security settings.
81 - Troubleshooting