Flexible Bay Devices; Removing And Installing Modular Devices - Fujitsu Lifebook S7110 User Manual

S7110.book Page 19 Monday, March 20, 2006 1:56 PM

Flexible Bay Devices

Your Fujitsu LifeBook notebook contains a Flexible Bay.
The Flexible Bay can house an optical drive, a Lithium
ion battery, or a weight saver. (Figure 2-17)
Your Flexible Bay will have one of the following devices
installed.
Modular Dual-Layer Multi-Format DVD Writer: This
■
allows you to access movies, software, and audio
DVD/CDs and record to DVD, CD, and DVD-RAM
discs.
Modular DVD/CD-RW combo drive: This allows you
■
to access movies, software, and audio DVD/CDs as
well as to write to CDs.
Modular DVD-ROM drive: This allows you to access
■
software, data, or audio DVDs and CDs.
■ Modular Lithium ion battery: This is a rechargeable
battery that can be used to power your LifeBook note-
book when an adapter is not connected.
Weight Saver: This is used to fill the bay when no
■
device is needed.
REMOVING AND INSTALLING
MODULAR DEVICES
There are two ways to remove and install modular
devices in the Flexible Bay:
Cold-swapping: swapping devices while your LifeBook
■
notebook is powered off.
Hot-swapping: swapping devices while your system is
■
active using the Unplug/Eject icon from your taskbar.
You should never leave your Flexible Bay
empty when the notebook is in operation.
If left empty, dust or foreign matter may
accumulate inside the notebook.
G e t t i n g t o K n o w Y o u r L i f e B o o k
Flexible bay
Figure 2-17 Flexible Bay
Cold-swapping
To cold-swap modular devices in your Flexible Bay
follow these easy steps: (Figure 2-18)
1. Close any open files.
2. Shut down your LifeBook notebook.
3. Pull out the Flexible Bay eject lever. This will push
your device out slightly, allowing you to remove the
device.
4. Slide your device out until it is clear of the bay.
This will require light force.
Figure 2-18 Removing/Installing a device in the Flexible Bay
Be careful when aligning and seating
devices in the bay. If the fit is incorrect,
you may damage the bay or the device. If
the device does not move easily in the bay,
remove it, and check for dirt or foreign
objects. It will require a firm push to latch
the device in place.
Flexible Bay Eject Lever
19