Battery Charger User’s Guide This user’s guide contains information on your battery charger. We strongly recommend that you read this guide before using the battery charger even if you are already familiar with computers. BATTERY CHARGER COMPONENTS Battery Connector 1 Figure 1.
• This charger is designed only for charging Fujitsu Lithium ion battery packs that have the proper mating connector. If you have questions, check your system User’s Guide or our accessories Web site to ensure that you are using the correct charger.
BATTERY CHARGER OPERATION The Power Indicator LED is on when the battery charger is connected to a plugged-in AC adapter. The two Charge Indicator LEDs show the charging status of the battery connected to the charger or the condition of the charger itself, as shown in Table 1.
• If the temperature of a battery connected to the charger is extremely high or low, the battery charger will standby for charg- ing until the battery returns to normal temperature. This is a safety feature designed to prevent damage to the battery.
• The charger can have two batteries con- nected at the same time, but it charges only one at a time. The battery that was con- nected first is charged first. The second bat- tery is held in a wait status until the first battery is completely charged.
• Never connect the battery charger to a physically defective battery or use a defective charger. • When the battery charger is not being used for charging, be sure to disconnect the AC adapter and remove any battery connected to the charger to avoid the chance of fire or equipment failure.
Fujitsu Computer Systems Contact Information If you have problems you are unable to resolve, consult your support representative, toll free at: • 1-800-8FUJITSU (1-800-838-5487) • E-mail: email@example.com • Web Site: http://www.computers.us.fujitsu.com/support Specification Power Requirements Operating Temperature Operating Humidity Maximum Outer...
Address: 1250 E. Arques Avenue (M/S 122), Telephone: (408) 746-6000 Declares that product: Battery Charger Model FJBC-GP This device complies with Part 15 of the FCC rules. Operations are subject to the following two conditions:(1) This device must not be allowed to cause harmful interference, (2) This device must accept any interference received, including interference that may cause undesired operation.
CET appareil numérique de la class B respecte toutes les exigence du Régle- ment sur le matérial brouilleur du Canada. Notice to All Users The Battery Charger can only be operated at a maximum ambient tempera- ture of 35° C (95° F).
For technical support call:1-800-8FUJITSU (1-800-838-5487) or e-mail us at: firstname.lastname@example.org Fujitsu and the Fujitsu logo are registered trademarks of Fujitsu Ltd. All other trademarks mentioned herein are the property of their respective owners. Product description data reflects Fujitsu design objectives and is provided for comparative purposes;...