Port Replicator Problems; Hard Drive Problems - Fujitsu Lifebook T730 User Manual

Tablet pc
Hide thumbs Also See for Lifebook T730:
Table of Contents

Advertisement

Problem
LifeBook Tablet PC fails to
recognize DVD/CD-
RW/CD-ROM's.
(continued)
The drive access indicator
on the Status Indicator
Panel blinks regularly with
no disc in the tray or the
drive is not installed.

Port Replicator Problems

Note: Be sure to power down your LifeBook Tablet PC before adding a printer to the Port Replicator parallel port.
Tablet PC does not turn on
when installed in the
optional Port Replicator

Hard Drive Problems

You cannot access your
hard drive.
Possible Cause
Optical drive tray is not
latched shut.
Wrong drive designator was
used for the disc in the appli-
cation.
DVD/CD-RW/CD-ROM is
dirty or defective.
The Windows auto insertion
function is active and is
checking to see if a disc is
ready to run.
Port Replicator AC adapter is
not plugged in.
Tablet PC is not properly
seated in the Port Replicator.
The wrong drive designator
was used by an application
when a bootable disc was
used to start the Tablet PC.
109 - Troubleshooting
Possible Solutions
Push on the front of the optical drive tray until it latches. If
that doesn't work, pull out the modular drive latch to remove
the device from the bay, then re-insert the drive until it
latched; this ensures that the drive is properly seated.
Verify the drive designator used by the application is the
same as the one used by the operating system. When the
operating system is booted from a DVD/CD, drive designa-
tions are automatically adjusted. Note that the drive designa-
tion can be changed with the Disk Management tool located
at Administrative Tools -> Computer Management.
Wipe the disc with a non-abrasive CD cleaning cloth and
reinsert. If it still will not work try another DVD/CD-RW/CD-
ROM in the drive.
This is normal. However, you may disable this feature.
Provide power to the Port Replicator.
Remove and re-dock your LifeBook Tablet PC.
Verify drive designator used by application is in use by the
operating system. When the operating system is booted from
a CD, drive designations are automatically adjusted.

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents