Detaching The Port Replicator - Fujitsu Lifebook S7110 User Manual

S7110.book Page 51 Monday, March 20, 2006 1:56 PM
Figure 4-18. Changing the Alignment Bar
3. With the alignment bar in vertical position, position
the system so that the right side is aligned with the
right stop. (Figure 4-19)
Figure 4-19. Aligning the notebook
4. Push your notebook down to connect it securely to
the port replicator.
5. Plug the AC adapter into the DC power jack and
plug the other end into a power outlet.
U s e r I n s t a l l a b l e F e a t u r e s

DETACHING THE PORT REPLICATOR

The optional port replicator can be detached from your
notebook while the power is on, while in standby mode,
or while the power is off. To detach the port replicator
follow these easy steps:
1. Pull the port replicator latch release outwards.
(Figure 4-20)
2. While holding the port replicator latch release, lift
your notebook to detach it from the port replicator.
Figure 4-20. Detaching the notebook
Right
stop
51