Setting Energy Parameter For Display - Trinity INFINITY User Manual

Infinity – Operational Manual

Setting Energy Parameter for Display:

The unit has user's programmable two types of Energy parameter
for display.(i)KWh (ii)KVAh
To set the energy parameter, follow the instructions below:
1. In Run Mode, press
enters into Programming Mode and press
prompting such as shown below.
2. Press
PROG
ENTR
indicates that the parameter now can be changed. Set the
parameter to either "KWh" or "KVAh" by pressing
3. Press
PROG
ENTR
will restart and return into Run Mode.
PROG
ENTR
ENERGY=KWh
key again. Immediately, P starts blinking which
key to confirm the parameter value. Hence, the unit
key for about four seconds. The unit
17
key till ENERGY is
and keys.