Table of Contents
Advertisement
config ip route
Syntax:
config ip route {add | del} {
net <net address>
netmask <netmask address>
[gw <ip address>]
if < if name>
}
Description:
add:
del:
net:
netmask:
gw:
if:
Example:
Cedar# config ip route add net 10.60.0.0 netmask 255.255.0.0 if lan
Cedar# config ip route add net 0.0.0.0 netmask 0.0.0.0 gw
67.100.23.68 if lan
Cedar# config ip route del net 10.60.0.0 netmask 255.255.0.0
11.4 Security Commands
11.4.1
show auth
Syntax:
show auth profile { all | <profile name> }
Description:
all:
<profile name>: Display detailed authentication profile.
Example:
Cedar# show auth profile all
Cedar# show auth profile EAP
Cedar 880AG Enterprise Dual-Radio AP/Bridge
Add a route entry in the routing table.
Delete a route entry in the routing table.
The network address of the specified route will apply.
The network mask address of the specified route will apply.
The gateway IP address of the specified route will apply.
The interface of the specified route will apply.
Display all authentication profiles.
82
Advertisement
Table of Contents
